So, in the case of schwazzing, the idea is to cause some level of damage and stress to the plant by removing its leaves, but afterward provide a precise regimen of macro-, micro- and secondary nutrients to replace all the nutrition lost through the heavy defoliation. Again, this all sounds good in theory.
Full Answer
What is schwazzing and how do I do it?
Schwazzing involves stripping your plants of all fan leaves beneath the top two or three nodes at two key times: Once at the start of the bloom phase, and again at the beginning of the third week of bloom.
How many times can you schwazze a plant?
Some will suggest to schwazze two times, with the first one always to be done just before the beginning of the flowering phase of the plant. The grower will remove the vast majority of fan leaves from the plant, leaving them looking almost bare, at first just before flowering and the second one during flowering.
How long does it take for schwazzing to work?
With less green foliage from when you started schwazzing, the cannabis plant should be able to bounce back within a matter of days to weeks with refocused energy towards developing the buds. It is important, however, to understand the guide below to get the best possible results when schwazzing.
What is schwazzing and is it bad for your crops?
When performed incorrectly, schwazzing and other forms of extreme leaf defoliation can cause significant harm, including complete crop failure. Your plants’ leaves play a critical role in the health and development of your crops.
Does Schwazzing increase yield?
As with other methods of heavy defoliation, the idea behind schwazzing is to increase yield by providing maximum light penetration and reducing or eliminating shade spots, while redirecting the plant's energy to the top budding sites.
Should I water after defoliating?
Flowering phase Also, remember to be extra careful when handling your plants to avoid disturbing any of their young buds. After this light defoliation, simply feed and water according to your regular schedule, giving your plants time to develop their flowers.
What to do after cutting buds?
If you cut the buds entirely off the stems, you'll have to use something like a drying rack to place the buds on to dry. If you leave a little stem, you can instead hang them from a line to dry.
How long does it take a plant to recover from defoliation?
Defoliation in flowering stage Remove all the big leaves you reach with your scissors, and leave the smaller ones. In about 3 days you'll see how these re-grow again, and after 7-10 days you'll have a dense foliage again.
Does defoliating increase yield?
Pruning, or defoliation, is a technique that keeps your cannabis plants healthy and growing properly. By removing small amounts of foliage during various phases of the life cycle, growers can increase a crop's yield and potency by allowing light to hit bud-producing nodes more directly.
Does Lollipopping increase yield?
Many growers have increased yields by lollipopping. We know enough about plant science to support the logic behind this type of pruning. What's even cooler is that you can combine lollipopping with topping or fimming.
Can you leave sugar leaves on bud?
Sugar leaves aren't as potent or flavorful as buds and are trimmed off before buds are dried. Sugar leaves are trimmed off so as not to trap moisture in buds, which can lead to mildew or mold. Trimming off sugar leaves also makes buds look better and taste less harsh.
When should I stop watering before harvesting?
Stop Watering 1-3 Days Before Harvest – After flushing, in the final days of harvest, you can further stress your plants by stopping watering. You want to allow the plant to start to wilt just a small amount, because then the plant “thinks” it is dying and as a last-ditch effort, it will increase resin development.
Should you trim fan leaves before drying?
Wet trimming can reduce the quality of the product. The sugar and fan leaves protect the buds while they dry and can help to create an ideal moisture level. When they are removed before drying, it can cause the buds to dry up more quickly than they should and negatively impact quality.
Should you remove fan leaves during flowering?
Yes you should – but with the correct technique. A proper thinning will remove 20-40% of the mid to upper foliage every 5-7 days. Removing these fan leaves opens up light and produces better air exchange to the lower canopy.
How much do you defoliate before flowering?
3 to 5 days before flowering: always leave 3 to 5 days between defoliating/pruning and switching your plant to flower. This way it has a few days to recover from the stress caused by cutting its parts.
Can you defoliate in week 4 of flower?
How to Defoliate in Week 4. The best practice is to completely remove everything beneath the first layer of trellis. Even if it is a bud site that is flowering, get rid of it. These puny tiny branches will never yield anything worth actually trimming, drying and curing.
How much do you defoliate before flowering?
3 to 5 days before flowering: always leave 3 to 5 days between defoliating/pruning and switching your plant to flower. This way it has a few days to recover from the stress caused by cutting its parts.
What week should you defoliate flowers?
Growing How-To: Defoliation: Defoliation in week 3 of flower.
Should you remove fan leaves during flowering?
Yes you should – but with the correct technique. A proper thinning will remove 20-40% of the mid to upper foliage every 5-7 days. Removing these fan leaves opens up light and produces better air exchange to the lower canopy.
What to do after a schwazzing plant?
Give your plants the right nutrients after schwazzing as this helps the plant to recover immediately.
What is the benefit of schwazzing cannabis?
The main benefit of schwazzing is the removal of fan leaves from the cannabis plant that eventually lessens the amount of trimming that do during harvest. ...
How to Schwazz Cannabis Plants?
To make it, the best thing to do is to begin removing the unhealthy leaves that may obstruct the growth of the plant and even hinder the light and air circulation.
When Is the Ideal Time to Schwazz Your Cannabis Plants?
Schwazzing cannabis plants are usually taking place for at least twice for the whole lifetime of the plant. The first is during the flowering stage and the second time is on after its three weeks. Maybe you think that these stages are critical to the survival of the plant as they are carried out late or even too early and may affect the plant’s growth and yields.
Why do we shwazz cannabis?
Why We Shwazz Cannabis Plants? Enormous defoliation is mean to reveal the lower part of the buds in cannabis plants that usually cannot get enough sun exposure that helps the plant to produce high quality and compact buds. It usually motivates the cannabis plant to have more amount of energy in such a particular area.
How does shwazzing help cannabis?
This process is considered a very efficient way to defoliate the cannabis plant with specific observation for the needed time to increase your yields . It is usually done when the cannabis plant reaches into its flowering stage.
How to neutralize stress in plants?
To neutralize the stress of the plants, you only need to do is on the same day of defoliating your plant increase the nutrients that you blend to help you acquire the best results .
What Is Schwazzing?
I was recently asked about “the schwazzing technique” used to grow cannabis. It apparently is found in a book that goes for a whopping $500!
How To Use Schwazze To Increase Your Cannabis Yields
Right before you switch to 12/12, excise most of your plants fan leaves, especially the ones that are bigger. You will notice that initially the leafy plants do not allow enough light past the canopy shadowing the rest of the plant. After defoliation, the bud sites will be exposed to light and the circulating air.
Why Is Schwazzing Done In Week 1 & 3?
These two are not magic numbers. However, they are general timings that have been noted to be ideal to defoliate growing cannabis plants. This is because cannabis plants can “re-lief” themselves in the first weeks of flowering but cannot do so in later stages.
Schwazzing Method Conclusion
This method of cannabis defoliation got its name from the sound the scissors make as they cut off the leaves. You can only imagine how intense the process has to be to make this lasting impression. Though it is a very risky procedure, schwazzing tends to lead to massive harvests in most varieties.
Why Schwazz a weed plant?
Intense defoliation is used to expose lower bud locations on plants that would otherwise be unable to develop dense, high-quality buds due to a lack of direct light. This encourages the plant to concentrate its efforts on those areas. Many lower fan leaves that do not get direct sunlight are more of a drain on the plant than an energy source. Most growers remove lower fan leaves and shaded bud sites to avoid immature buds. However, schwazzing is indiscriminate; if it’s a fan leaving, go ahead and do it.
Is Schwazzing autoflowers possible?
Every cannabis is unique, and this involves its resilience to stress while others produce more potent buds. There’s a chance that stress will introduce undesired features into the plant, such as hermaphrodite, which some strains are more prone to than others. As a result, it is critical to plan your schwazz carefully, from seed to harvest, by selecting the best weed strain for your needs.
How to avoid herming after schwazzing?
Choosing the right plant will help you avoid herming issues after Schwazzing. More stable genetics will be more tolerant of the stresses that we are presenting to the plants. While you are choosing phenotypes that work well for your grow. You can note which strains / phenotypes respond well to plant work projects such as Schwazzing and aggressive feedings, then clone from those plants.
How do you Schwazze?
Schwazzing is a method that can either help you deliver your highest yield ever, or cause plant lock and hermaphroditic plants. Please proceed with caution! We offer consultation if you have any questions, check the links at the bottom of this article.
How many people do you need to swagger a plant?
Schwazzing is most effectively completed with 2-3 people per plant. Sharp, clean scissors are required to Schwazze. It is very important to finish Schwazzing your whole room the same day you want to keep the entire room on the same watering schedule.
What happens after day 20 of a schwazze?
After day 20, a Schwazze will cause more harm than good as the plant has already refocused all of its energy from rooting and growing taller, to flowering and stacking weight. The plants at this point are ready to be netted or caged.
When to switch light cycle for veg?
While vegging we recommend an 18/6 photoperiod. The light cycle should switch to 12/12 as soon as the plants are loaded into the flower room. The same day the plants are loaded into the flower room, the Day 1 Schwazze occurs, and that night will be the first 12-hour night cycle.
When is a schwazzing complete?
Schwazzing a plant is complete once you place your hand above the soil and light is reaching your hand.
Do plants need more nutrients when schwazzing?
Your plants won’t necessarily require more nutrients when Schwazzing. It’s quantity vs. quality. Quality wins every time.
What Are the Benefits of Schwazzing?
One of the reasons cannabis growers prefer schwazzing is because it drastically increases the yield. The standard yield without schwazzing is 1 ½ to 2 pounds per light bulb. With schwazzing, cannabis growers see 3 to 4 pounds per light.
Why is schwazzing good for you?
It allows you to grow more cannabis from a smaller area. This means you will save money on energy because you won’t need a large space.
How Can You Schwazz Your Cannabis Plants?
Now that you know the basics of schwazzing and what it can do for your cannabis plants, let’s go over how you can get started with schwazzing .
Does schwazzing marijuana yield better?
Schwazzing can transform your marijuana leaves and gives you a better yield. Larger yield means better profits. For more tips on growing cannabis, follow this blog!
Does swaggering marijuana make it stronger?
Schwazzing your marijuana plants will results in stronger and larger plants without using more energy.
Is defoliation the same as schwazzing?
You’re probably thinking: isn’t defoliation the same as schwazzing? Although both methods are similar, schwazzing is a more extreme form of defoliation. Defoliation trims excess leaves from the plant while schwazzing removes all of the leaves.
How does schwazzing help plants?
As with other methods of heavy defoliation, the idea behind schwazzing is to increase yield by providing maximum light penetration and reducing or eliminating shade spots, while redirecting the plant’s energy to the top budding sites. This type of defoliation can have other benefits as well, including:
When to schwazz a plant?
Schwazzing involves stripping your plants of all fan leaves beneath the top two or three nodes at two key times: Once at the start of the bloom phase, and again at the beginning of the third week of bloom. As with other methods of heavy defoliation, the idea behind schwazzing is to increase yield by providing maximum light penetration ...
What are the factors that determine the success of a schwazzing process?
But there are many other factors that must be considered and dialed in precisely in order for the schwazzing process to be successful, including air quality, temperature, humidity, lights, airflow, grow medium and CO2 levels.
What is the purpose of removing leaves from a schwazzing plant?
So, in the case of schwazzing, the idea is to cause some level of damage and stress to the plant by removing its leaves, but afterward provide a precise regimen of macro-, micro- and secondary nutrients to replace all the nutrition lost through the heavy defoliation.
What is the schwazzing technique?
The schwazzing technique, also called simply “schwazze,” is a rather extreme means of trimming fan leaves during the flowering stage.
Can you test schwazzing on a few plants?
However, if you are interested in giving schwazzing a shot and tend to run the same genetics each cycle, you can test the technique on a few plants to see how your strain reacts before defoliating the rest of your grow.
Can you use Schwazzing to remove fan leaves?
While Haupt and other growers have found success using the schwazzing technique of removing fan leaves, it is not recommended for the beginner or amateur grower. When performed incorrectly, schwazzing and other forms of extreme leaf defoliation can cause significant harm, including complete crop failure.
