Minerals: The minerals you will need to add are salt, calcium, and maybe phosphorus. Show steers rarely need phosphorus but an added calcium source should be considered. A suitable calcium source is feed-grade limestone. A minimum calcium to phosphorus ratio is 1.2:1 but 2:1 or 3:1 are preferable. The higher ratios might be needed when feeding fat sources such as vegetable oil (fat interferes with calcium absorption). Use trace mineral salt to avoid possible deficiencies of other minor minerals. A 50:50 mix of limestone and salt available free choice may be adequate if feed mixing facilities are limiting. Alfalfa meal pellets can be a source of protein and calcium. Commercial feed companies produce complete mineral mixes that are available from your local feed dealers.
What is the best feed for Steers and heifers?
steers or breeding heifers. Diets A and B, with less corn and more roughage, are good for start- ing cattle on feed. Diets B and C work well for feeding heifers where
How should you feed your show cattle?
Most show cattle are fed to meet a certain goal by a particular date or series of dates. Determine what you want them to weigh, then create a plan to get there, the experts agree. This includes evaluating their past nutrition plane then building up to a feeding plan to meet the end goal. And it needs to begin the day you start feeding your calf.
How much should I Feed my show steer?
Most range between 2 to 3 percent. In feeding your show steer to obtain the desirable ideal carcass, remember these points: ✦Try to select a calf with more than adequate muscle shape to ensure an average or better REA (12 to15 square inches).
What is the best diet for early maturing steers?
High-fat diets are not recommended for early-maturing steers or breeding heifers. Diets A and B, with less corn and more roughage, are good for start- ing cattle on feed. Diets B and C work well for feeding heifers where
How much should a show steer gain per day?
between 2.0 and 3.5 pounds a dayShow steers normally are on feed about 270 days and gain between 2.0 and 3.5 pounds a day. This rate of gain and growth can be con- trolled slightly for faster or slower gain by regulating the feed ration and amount fed.
What is the best show feed for cattle?
Corn and oats are the most widely used in show diets. Oats is normally too expensive to be included in standard diets except for creep diets and starting cattle on feed. However, oats can be a useful supplement to corn for show cattle-type diets. Many rations will contain molasses.
What is the best grain to feed a steer?
Corn, oats, and barley are the primary grains fed to cattle. Oats, which has a lower energy value due to its high fiber content, is considered the "safest" grain in regards to potential digestive disturbances.
What do you feed a show bull?
The gain for yearling bulls prior to the breeding season should be about 2 pounds per day. This would require a diet containing 10-11% protein and 60-70% TDN (dry matter basis) which could be supplied by 6-10 lbs. of grain per day and full-feed of medium quality hay.
How do you fatten up a show steer?
0:010:40What to Feed Cattle to Fatten Them Up - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat product do I believe in as far as to promote growth and not let cattle get too fat and to meMoreWhat product do I believe in as far as to promote growth and not let cattle get too fat and to me that's an easy answer. The fitters edge that's. That's a universal feed.
How much grain should a steer eat?
The steer will consume roughly 15-20 pounds of hay per day or 2 percent of his body weight. Grain is added to the diet three months before taking the steer to the processor. The amount of time on feed can vary from 60-150 days. For a backyard steer, 90 days on grain should be sufficient.
What do you feed beef steers?
Beef cattle can utilize roughages of both low and high quality, including pasture forage, hay, silage, corn (maize) fodder, straw, and grain by-products.
What do you feed a steer before slaughter?
For finishing beef cattle prior to slaughter, most are fed a mixture of ground, shelled corn or millet. These grains are inexpensive, nutritious and add fat to the meat to make it tender.
How much corn does it take to finish a steer?
Corn production requirements Depending on the size and weight of the cattle, the amount of forage available for growing lighter calves, access to low-priced byproducts and other factors, 50 to 80 bushels are typically required to finish one steer.
What is a bull's favorite food?
They include things such as silage, grass, and hay. Although not particularly nutritious, roughages will give the bull enough fibers so that it has good digestion. As such, they will keep the animal's tissue healthy. Therefore, these substances should represent the majority of the bull's diet.
What can I feed my steer to gain weight?
To gain 2.75 pounds a day, a diet with 80% TDN will need to be provided. Steers need to be placed on a 70% to 85% grain diet to finish adequately. During the last 100 pounds of gain, the diet may approach 85% grain content.
How much grain should I feed a bull?
Essentially, the bulls need to consume just less than 2 percent of their body weight to hold even while consuming good hay that is at least green. Just to maintain weight, a: 1,700-pound bull needs a daily intake of 33 pounds of dry matter that is 7 percent protein and 46 percent total digestible nutrients (TDN)
What does beet pulp do for show cattle?
Re: Beet Pulp beet pulp is usually fed as a filler for show calves. it has some protein, but not a lot. if you need it to expand the calf's guts, feed it dry, but only on the show morning, otherwise it will cause sore mouth, as it is so rough.
What do you feed a show heifer?
heifer should get 12 lb. of the grain mix. You also need a high quality grass hay with no less than 10% Crude Protein and she will probably consume another 6-12 lb. of hay.
What does beet pulp do for cattle?
A combination of beet pulp and crop residues can be an economical substitute for hay, silage, or pasture in beef cow diets. Beet pulp contains highly digestible fiber making it a nice complement to poor quality residues or forages. It can be used as a component of a supplement or as an ingredient of a complete diet.
What does Precon do for cattle?
Gets cattle eating quickly to restore nutrients and encourage calves just weaned off cow and/or stressed during transportation to begin to eat dry feed and recover from the stresses of weaning and shipping.
How do show cattle feed?
This includes evaluating their past nutrition plane then building up to a feeding plan to meet the end goal. And it needs to begin the day you start feeding your calf.
What is the importance of companionship in a cow's diet?
Almost as important as balanced amounts of protein, energy, and fiber is companionship. “Cattle like to have a buddy to eat with,” says May. “They do better if they are not alone.”.
